Free Images - SnappyGoat.com- bestof:Navy 050803-N-1332Y-005 Machinery Repairman Fireman Apprentice Antoinette Marshall, fabricates a replacement clamp with a milling machine in the machine repair

Click Here for More Images from iStock- 15% off with coupon 15FREEIMAGES

service engineer worker at industrial compressor refrigeration station repairing and adjusting equipment at manufacturing factory

Aviation mechanic repairing jet, inside of engine view. Handsome African American engineer examining aircraft, close up

Aircraft Technician inspecting and working in the main electronics bay of a 757 commercial airplane.

Two Aircraft engineers and mechanics in the hangar repairing and maintaining private helicopter.

Checking small airplane

Close Up Of Factory Engineer Operating Hydraulic Tube Bender

Male mechanics with multimeter and clipboard working on helicopter engine in hangar.

Side view of a professional aviation mechanic performing a routine inspection of the aircraft bottom

The frigate HMAS Arunta (right), destroyer HMAS Sydney (centre) and amphibious assault ship HMAS Canberra (left) of the Royal Australian Navy. They are docked at Garden Island, Sydney Harbour, in preparation for an open day to the public during Navy Week, the first open day since the Covid pandemic. A shadow from a skyscraper in the central business district is starting to make a shadow on the hull of HMAS Canberra. This image was taken at sunset from Woolloomooloo Bay on 25 February 2023.

Truck mechanic is checking safety using digital tablet.

Mechanics fixing the engine of a helicopter

Industry engineer worker wearing safety uniform control operating computer controlled Lathe grinding machine working in industry factory is metal manufacturing industry concept.

Male Worker Inspecting Water Valve For Leaks In Basement

control room engineers

Male worker maintenance technician using wrench while repairing aircraft at repair station

Male mechanics with voltage tester working on helicopter engine in hangar.

Trained Engineer And Apprentice Using Automated Milling Machine Together

Aircraft mechanic fixing jet engine and using multimeter, mid shot. Male engineer examining helicopter, side view

The main mast of HMAS Canberra, a Canberra Class Amphibious Assault Ship of the Royal Australian Navy, is surrounded by scaffolding. She is docked at Garden Island naval base in Sydney Harbour. This image was taken on a sunny afternoon on 11 November 2023.

A Canadian Navy warship docked at pier.

Industry engineer wearing safety uniform control operating lathe grinding machine working with detail tablet computer on hand in industry factory is metal manufacture industry concept.

Aircraft mechnic repairing jet engine in a hangar.

Mechanics restoring or repairing a machine in a workshop. Skilled manufacturing engineers working on oil refinery equipment or pump and pipeline machinery installation inside an industrial factory

Caucasian Semi Truck Mechanic Performing Diesel Engine Maintenance with Scheduled Checkup. Transportation Industry Theme.

Male and female mechanics with multimeter working on helicopter engine in hangar.

Engineer under checking the industry chilled water fan coil unit air conditioner is water cooling tower air chiller HVAC system of large industrial building to control air system

Aviation mechanic examining and repairing helicopter in hangar, inside of engine close view. Air vehicle inspection and maintenance concept

Asian engineer working in engine room. He using laptop in engine inspection of fishing vessel, occupation and technology concept

An airplane mechanic working on the wheels of a private jet inside the hangar of a small general aviation airport in California.

Free Images: "bestof:Navy 050803-N-1332Y-005 Machinery Repairman Fireman Apprentice Antoinette Marshall, fabricates a replacement clamp with a milling machine in the machine repair"

US_Navy_050803-N-1332Y-005_Machinery_Repairman_Fireman_Apprentice_Antoinette_Marshall,_fabricates_a_replacement_clamp_with_a_milling_machine_in_the_machine_repair_shop_aboard_USS_Kitty_Hawk_(CV_63).jpg

Defense.gov News Photo 050803-N-1332Y-006.jpg

US_Navy_111025-N-OY799-174_Machinery_Repairman_Fireman_Dane_McDonald,_from_Milwaukee,_Wis.,_fabricates_a_tool_on_a_universal_milling_machine.jpg

US_Navy_100914-N-5853P-152_Machinery_Repairman_Fireman_Emillia_Castaneda_operates_a_milling_machine_to_repair_a_broken_holding_bracket_for_a_bell_a.jpg

US_Navy_070730-N-1994L-041_Machinery_Repairman_2nd_Class_Kevin_uses_a_milling_machine_to_fabricate_a_replacement_fan_shaft_in_the_machinery_repair_shop_aboard_amphibious_assault_ship_USS_Bonhomme_Richard_(LHD_6).jpg

US_Navy_100731-N-6092D-151_Machinery_Repairman_Fireman_Nate_Goodwin_manufactures_a_valve_seat_in_the_machine_repair_shop_aboard_USS_Abraham_Lincoln_(CVN_72).jpg

US_Navy_061206-N-2908M-003_Machinery_Repairman_Fireman_Nicholas_Meche_manufactures_a_door_bracket_in_the_machine_shop.jpg

US_Navy_040722-N-1238B-028_Machinery_Repairman_Fireman_Richard_Henegar,_assigned_to_the_amphibious_assault_ship_USS_Wasp_(LHD_1)_inspects_a_piece_of_metal_on_a_milling_machine.jpg

US_Navy_040108-N-5952R-001_Machinery_Repairman_Fireman_Paul_May,_from_Amarillo,_Texas,_uses_a_lathe_in_the_USS_Enterprise_(CVN_65)_machine_shop_to_repair_a_potable_water_pump.jpg

US_Navy_091201-N-6003P-002_Machinery_Repairman_1st_Class_Aaron_Marshall_modifies_a_socket_on_a_milling_machine.jpg

US_Navy_060615-N-0000X-001_Machinery_Repairman_2nd_Class_Evan_Sams_uses_a_milling_machine_to_make_a_part_for_a_submarine_while_in_the_machine_repair_shop_aboard_the_submarine_tender_USS_Frank_Cable_(AS_40).jpg

US_Navy_060301-N-4015L-012_Machinery_Repairman_2nd_Class_Anthony_Crosen_monitors_a_milling_machine_in_the_machine_shop_aboard_the_Nimitz-class_aircraft_carrier_USS_George_Washington_(CVN_73).jpg

US_Navy_050517-N-7130B-018_Machinery_Repairman_3rd_Class_Kevin_Weeks_uses_a_universal_milling_machine_to_mill_a_piece_of_aluminum_in_the_machine_shop_aboard_the_Nimitz-class_aircraft_carrier_USS_Ronald_Reagan_(CVN_76).jpg

US_Navy_100707-N-6362C-008_Machinery_Repairman_1st_Class_Aaron_Marshall_uses_a_computer_numerical_control_lathe_to_create_brackets_for_water_sink_fittings_in_the_machine_shop_aboard_the_aircraft_carrier_USS_Harry_S._Truman_(CVN.jpg

US_Navy_030901-N-2824H-001_Machinery_Repairman_3rd_Class_Mark_Lindsey_utilizes_a_lathe_to_manufacture_a_repair_part_for_a_sewing_machine_aboard_USS_Essex_(LHD_2).jpg

US_Navy_050104-N-9079D-181_Machinery_Repairman_1st_Class_Scott_Sullivan,_of_Salem,_Mass.,_cuts-out_a_screw_on_a_lathe_machine_in_the_Repair_Shop_aboard_the_guided_missile_destroyer_USS_Benfold_(DDG_65).jpg

Sailor_uses_a_milling_machine_aboard_USS_Harry_S._Truman._(11671601746).jpg

US_Navy_060323-N-0555B-009_Machinery_Repairman_Fireman_Brain_Barr_uses_a_lathe_to_machine_a_bronze_coupler_in_the_machine_shop_aboard_the_Nimitz-class_aircraft_carrier_USS_Ronald_Reagan_(CVN_76).jpg

US_Navy_070611-N-8923M-019_Machinery_Repairman_Fireman_Domonique_Roberson_adjusts_measurements_while_making_a_sounding_cap_in_the_machine_shop_aboard_Nimitz-class_aircraft_carrier_USS_Harry_S._Truman_(CVN_75).jpg

US_Navy_040406-N-9630B-040_Machinery_Repairman_Fireman_Royce_Eagle,_of_Logansport,_Ind.,_re-sharpens_a_cold_chisel_in_the_machine_shop_aboard_USS_George_Washington_(CVN_73).jpg

US_Navy_070821-F-8678B-034_Machinery_Repairman_Fireman_Edward_O._Pastoral_mans_a_M2_.50_caliber_machine_gun.jpg

US_Navy_071126-N-8923M-020_Machinery_Repairman_Fireman_Domonique_Roberson_makes_air_conditioning_bottle_adapters_in_the_machine_shop_aboard_the_Nimitz-class_aircraft_carrier_USS_Harry_S._Truman_(CVN_75).jpg

US_Navy_071127-N-0916O-066_Machinery_Repairman_Fireman_Will_Guevara_sharpens_drill_bitts_on_a_pedestal_grinder_in_the_machine_shop_aboard_the_nuclear-powered_aircraft_carrier_USS_Enterprise_(CVN-65).jpg

US_Navy_101102-N-1004S-144_Machinery_Repairman_Fireman_Gabriel_Martinez,_from_Great_Falls,_Mont.,_uses_a_lathe_machine_to_turn_down_a_piece_of_roun.jpg

US_Navy_110926-N-TU894-002_Machinery_Repairman_Fireman_Mario_C._Smith_makes_studs_for_distilling_units_in_the_machine_shop_aboard_USS_George_H.W._B.jpg

US_Navy_040629-N-0246T-087_Machinery_Repairman_Fireman_Ramon_Castillo,_from_Dallas,_Texas,_drills_a_hole_in_a_stanchion_cap,_in_the_Machine_Shop_aboard_USS_George_Washington_CVN_73.jpg

US_Navy_060529-N-1332Y-476_Machinery_Repairman_Fireman_Dave_Evangelista_uses_a_caliper_to_measure_a_bearing_from_an_Aqueous_Film_Forming_Foam_(AFFF)_sprinkler_component_in_the_machine_shop_aboard_USS_Kitty_Hawk_(CV_63).jpg

US_Navy_080925-N-2456S-078_Machinery_Repairman_Fireman_Ben_Kelly_uses_a_dial_caliber_to_measure_a_piece_of_metal.jpg

US_Navy_070228-N-6274T-005_Machinery_Repairman_2nd_Class_David_J._Potter_uses_a_milling_machine_to_create_a_new_WSC-8_locking_block.jpg

US_Navy_101102-N-1004S-065_Machinery_Repairman_Fireman_Mark_Lepore,_from_Rochester,_N.Y.,_uses_a_pneumatic_die_grinder_to_cut_wiring_holes_in_the_b.jpg

US_Navy_111130-N-JB593-102_Machinery_Repairman_Fireman_Darryl_Dayrit,_assigned_to_the_submarine_tender_USS_Frank_Cable_(AS_40),_operates_a_gap_lath.jpg

US_Navy_051030-N-7748K-003_Machinery_Repairman_Jesse_Prause_of_Phoenix,_Ariz.,_uses_a_milling_machine_to_make_a_chuck_key.jpg

US_Navy_040618-N-8148A-037_Machinery_Repairman_2nd_Class_Michael_Wallace,_left,_from_Jackson,_Ohio,_ensures_a_milling_machine_drill_bit_shaves_a_key_way_precisely_at_the_pre-aligned_position_on_a_tension_wrench.jpg

US_Navy_091212-N-4959G-008_Machinery_Repairman_2nd_Class_Christopher_Afanador_makes_bolts_using_a_Lathe_machine.jpg

US_Navy_050909-N-7569S-002_Machinery_Repairman_2nd_Class_Joshua_Montemayor_removes_an_elevator_stanchion_actuator_with_a_mill_machine.jpg

US_Navy_071210-N-0455L-066_Aboard_Nimitz-class_aircraft_carrier_USS_Harry_S._Truman_(CVN_75),_Machinery_Repairman_Fireman_Christopher_Fanador_cuts_a_brass_cylinder_with_a_lathe_machine_to_make_coins.jpg

US_Navy_060529-N-1332Y-450_Machinery_Repairman_3rd_Class_Callie_Ramsay_from_Detroit,_removes_metal_shavings_after_milling_a.jpg

US_Navy_050522-N-1205S-050_Machinery_Repairman_2nd_Class_Boyd_Bagnall_of_Sheridan,_Ore.,_tightens_a_drill_bit_on_a_lathe_in_the_Machine_Repair_Shop_aboard_USS_Nimitz_(CVN_68).jpg

US_Navy_061026-N-4133B-083_Machinery_Repairman_3rd_Class_Kevin_Weeks_from_San_Gabriel,_Calif.,_manufactures_a_clasp_on_a_universal_mill_in_the_machine_shop_aboard_USS_Ronald_Reagan_(CVN_76).jpg

US_Navy_070219-N-2959L-001_Machinery_Repairman_2nd_Class_Ronald_Brumback_watches_closely_as_he_carefully_mills_a_new_part_in_the_machine_shop_on_board_USS_Ronald_Reagan_(CVN_76).jpg

USS_Carl_Vinson_machine_shop_activity_141025-N-TP834-324.jpg

USS_Carl_Vinson_machine_shop_activity_141025-N-TP834-019.jpg

USS_Carl_Vinson_machine_shop_activity_141025-N-TP834-003.jpg

US_Navy_040902-N-7683J-001_Machinery_Repairman_2nd_Class_Susan_Kramber_from_Sanlorenzo,_Puerto_Rico,_threads_a_bushing_for_weight_lifting_equipment_in_the_Machinery_Repair_shop_aboard_the_conventionally_powered_aircraft_carrier.jpg

Bataan_Amphibious_Ready_Group,_2014_Deployment_140425-N-AO823-019.jpg

US_Navy_120201-N-JS205-034_Machinery_Repairman_2nd_Class_Will_Roberts,_assigned_to_the_submarine_tender_USS_Emory_S._Land_(AS_39),_measures_a_feele.jpg

US_Navy_091107-N-8913A-067_Machinery_Repairman_Fireman_Chris_Wiserma_removes_a_hydrolic_fuel_tank_cap_aboard_the_aircraft_carrier_USS_Harry_S._Truman_(CVN_75).jpg

US_Navy_080125-N-7955L-053_Machinery_Repairman_Fireman_Keith_Stewart_uses_a_drill_press_to_drill_a_hole_in_a_piece_of_steel_in_the_machinery_repair_shop_aboard_the_amphibious_assault_ship_USS_Kearsarge_(LHD_3).jpg

US_Navy_100806-N-0754Y-011_Machinery_Repairman_Fireman_Tyrell_Phillips_drills_holes_into_a_metal_plate_during_training_on_a_electro-arc_metal_disintegrator_aboard_USS_George_Washington_(CVN_73).jpg

US_Navy_100906-N-6362C-058_Machinery_Repairman_Fireman_Mark_Mirelez_uses_a_lathe_to_fabricate_a_knife_edge_for_a_watertight_door_aboard_USS_Harry_S.jpg

US_Navy_111025-N-OY799-199_Machinery_Repairman_Fireman_Recruit_Allisen_Earls,_from_Yucaipa,_Calif.,_taps_grease_caps_in_the_machinery_repair_shop_a.jpg

US_Navy_110908-N-XE109-471_Machinery_Repairman_2nd_Class_William_M._Grabowski_observes_the_cutting_of_door_gauges_in_the_repair_shop_aboard.jpg

US_Navy_101222-N-9094S-015_Damage_Controlman_Fireman_Camille_McDonald_and_Machine_Repairman_Fireman_Veronica_Cerna,_both_assigned_to_the_U.S._7th_F.jpg

US_Navy_050620-N-7869M-092_Machinery_Repairman_3rd_Class_Richard_Henegar_uses_a_lathe_machine_to_turndown_a_piece_of_carbon_steel_to_3-8_of_an_inch_for_threading.jpg

US_Navy_070822-N-8923M-142_Machinery_Repairman_2nd_Class_Patrick_Koenig_machines_metal_on_a_lathe_in_the_machine_shop_of_Nimitz-class_aircraft_carrier_USS_Harry_S._Truman_(CVN_75).jpg

US_Navy_080219-N-2420K-022_Machinery_Repairman_2nd_Class_Joseph_English_uses_a_portable_smoke_machine_to_create_a_more_realistic_firefighting_environment_during_a_damage_control_drill_aboard_the_guided-missile_frigate_USS_Ingra.jpg

US_Navy_110406-N-OY799-152_Machinery_Repairman_3rd_Class_Heather_Fogle,_from_Midlothian,_Texas,_checks_the_outside_diameter_of_a_shear_pin_in_the_m.jpg

US_Navy_080625-N-3946H-036_Machinery_Repairman_3rd_Class_Russell_Stull,_of_Kipton,_Ohio,_measures_the_diameter_of_a_brass_plug_in_the_machine_shop_aboard_the_aircraft_carrier_USS_Kitty_Hawk_(CV_63).jpg

US_Navy_070413-N-3038W-042_Machinery_Repairman_3rd_Class_Anthony_Gerhardt_creates_a_guide_pin_for_support_equipment_using_a_lathe_in_the_machine_shop_aboard_Nimitz-class_aircraft_carrier_USS_John_C._Stennis_(CVN_74).jpg

US_Navy_040406-N-2385R-001_Machinery_Repairman_2nd_Class_Boyd_Bagnall,_of_Sheridan,_Ore.,_completes_a_threading_job_on_a_lathe_in_the_machine_shop_aboard_the_nuclear_powered_aircraft_carrier_USS_Nimitz_(CVN_68).jpg

US_Navy_070716-N-1226D-074_Machinery_Repairman_2nd_Class_Kevin_Mech_uses_a_lathe_to_make_a_line_shaft-bearing_socket_in_the_machine_shop_aboard_amphibious_assault_ship_USS_Bonhomme_Richard_(LHD_6).jpg

US_Navy_040703-N-9954W-031_Machinery_Repairman_3rd_Class_Floyd_Francis,_of_Ocala,_Fla.,_uses_a_micrometer_to_measure_metal_stock_in_the_Machine_Shop_aboard_the_Nimitz-class_aircraft_carrier_USS_George_Washington_CVN_73.jpg

US_Navy_040727-N-5821P-015_Machinery_Repairman_3rd_Class_Desmond_Nelson_of_Stratford,_Conn.,_uses_a_lathe_to_machine_a_piece_of_stainless_steel.jpg

US_Navy_051202-N-9866B-006_Machinery_Repairman_3rd_Class_William_Peterson,_the_assistant_leading_petty_officer_of_the_Machine_Shop,_bores_holes_for_night_vision_goggle_test_equipment.jpg

US_Navy_051202-N-9866B-009_Machinery_Repairman_3rd_Class_William_Peterson,_the_assistant_leading_petty_officer_of_the_Machine_Shop,_bores_holes_for_night_vision_goggle_test_equipment.jpg

US_Navy_040826-N-0057P-021_Machinery_Repairman_3rd_Class_Phillip_Stewart,_of_Great_Falls,_Mont.,_works_in_the_machine_shop_with_a_laythe_to_machine_down_an_adaptor_for_a_flange.jpg

US_Navy_080815-N-9079D-298_Machinery_Repairman_3rd_Class_Tim_D._Moody,_from_Wyalusing,_Pa.,_drills_holes_to_make_blank_flanges_in_the_machine_shop_aboard_the_aircraft_carrier_USS_Abraham_Lincoln_(CVN_72).jpg

US_Navy_060420-N-9723W-167_Machinery_Repairman_2nd_Class_Cody_Sterling_repairs_a_valve_using_a_lathe.jpg

US_Navy_060419-N-2568S-139_Machinery_Repairman_1st_Class_Robert_Mims_describes_to_Secretary_of_the_Navy_(SECNAV)_the_Honorable,_Dr._Donald_C._Winter_several_types_of_work_the_machine_shop_is_capable_of_producing.jpg

US_Navy_080715-N-2638R-002_Machinery_Repairman_2nd_Class_James_Shaw,_from_San_Diego,_Calif.,_trims_down_part_of_a_housing_seal.jpg

US_Navy_051102-N-2209D-024_Machinery_Repairman_3rd_Class_Ronald_A._Brumback_measures_the_circumference_of_a_hole_drilled_into_solid_steel_stock_using_a_lathe.jpg

Defense.gov News Photo 080513-N-7981E-484.jpg

US_Navy_040709-N-7232R-012_Fireman_Mathew_Lucas_controls_cuts_being_made_to_a_spur_gear_on_a_milling_machine_in_the_machine_shop_aboard_USS_John_C._Stennis_(CVN_74).jpg

US_Navy_060531-N-3931M-035_Jennifer_E._Marcos,_a_medical_technician_and_chapter_service_representative_for_the_Philippine_National_Red_Cross,_draws_blood.jpg

US_Navy_080207-N-9639L-077_Hull_Maintenance_Technician_Fireman_Jason_Porter_welds_a_spar_in_the_machine_shop_aboard_the_aircraft_carrier_USS_Harry_S._Truman_(CVN_75).jpg

Sailors visit with Orphans DVIDS352672.jpg

US_Navy_120126-N-IT566-029_Adm._Cecil_Haney,_commander_of_U.S._Pacific_Fleet,_talks_with_Chief_Machinery_Repairman_Oly_Samonte,_the_machine_shop's.jpg

US_Navy_040421-N-9621S-037_Lt._John_Porter,_of_Tacoma,_Wash.,_takes_noise_level_readings_with_Machinery_Repairman_3rd_Class_Jeremy_Jager,_of_Alexandria,_S.D.,_in_the_machine_shop_aboard_USS_George_Washington_(CVN_73).jpg

Terms of Use Search of the Day